20. Seeing that we have a group of targets, I'll increase the Ripple Interval to 0.3 seconds to space out the impact points. 21. Lining up our target approach. 22. Maneuver the aircraft to place the reticle over the target and hold down the "Space" bar or trigger. 23. Keeping the trigger held down, fly the aircraft so that the G-line stays centered in the targeting reticle. This will keep us on the target. 24. A count-down timer to release is displayed on the left side of the HUD. An audible tone will be heard 2 seconds before release. 25. Release! The weapons are automatically released, but you must keep holding down the trigger until all the bombs have been released. 26. For the next pass, we'll try level-bombing using the CCRP mode in combination with the "Shkval" targeting system to lock the target. We'll then have the autopilot fly the aircraft to the release point. 27. We'll use FAB-100 light-weight, blast-fragmentation bombs. In this case, they are loaded on Multiple Ejector Racks (MER) with 4 bombs each. We'll set the Ripple Interval switch to the setting designed for this purpose. 28. The "KMGU/MBD Series" switch configures the release such that weapons will come off one station only after the previous station has been unloaded. 29. I'll set the Ripple Quantity switch to "All." 30. Lining up our target approach along the line of targets. 31. Activate the "Shkval" system by pressing "O". Search for and lock the target or the point of interest on the ground. 32 ...
See Also : ±1±: Best Buy Women's Watches On Sale! +99% Shop For Home Theater !!1 Life Fitness Elliptical Review
0 comments:
Post a Comment